Ruffled Reading Jacket

There's going to be a brief hiatus in posts soon, as I will be doing some travelling.

During my travels, I will be giving the reading jacket shown below as a gift to my mother. I do hope it fits her well. She likes the 3/4 sleeves, but the cuffs might be snug for her liking. I'll find out in about a week!

This is a variation of my Simplicity Itself Reading Jacket. The main body is made the same way. The entire work, except for the ruffled edge, is worked in the back loops.

First, the yarn.



The owner of one of our local yarn shops was retiring and selling off her stock some months ago. Sad to see her go, but it did allow me to buy 10 balls of this yarn, which would ordinarily have been completely out of my budget. I had no plans for it at all; just couldn't pass up the deal! It's a hand-wash only blend of two wools. I used all 10 balls to make the jacket, using a 9.00mm hook. Cuffs were done in sc, cuff to elbow in hdc and the rest in dc.

After working up the main body of the jacket, I sewed the cuffs and sleeves to about the elbow.



This shows the seaming on the arm, were you can also see part of the turning seam as I build up the body. After the sleeves were sewn closed, I joined the yarn again near a seam and started working around the edge, making sure to start the first round from the inside, so that the peaks and valleys of working in the back loop continued uninterrupted. In the first round only, I did 2 dc together at the sleeve seams to avoid a gap.



Here's a more detailed view of the rounds at the sleeve seem, and showing the ruffle.

The rounds were done in dc except for the last round before the ruffle, which was done in hdc. The ruffle was done by doing [1 dc, 1ch, 1dc] into each hdc stitch.



Here's a front view of the jacket, as worn by my younger daughter.



Because of how it was made, there is no right side up or upside down to this jacket.




From the back, it's hard to see where the rounds done to build up the body start. If you look closely at the bottom, you can see the round where it was worked into the foundation chain.

Here's hoping it fits my mom okay! :-)

Simplicity Itself Reading Jacket

A number of years ago I was talking to my mother in law about crafting, crochet and some of the different things that were popular over the years. She described to me a garment called a reading jacket that was like a shawl or stole, but extended to a cuff at the wrists. Not too long ago I found a pattern that was very much like she described and I made it for her. I don't have a photo of it, but it consisted of making a rectangular stole, then closing up the short sides with a cuff worked in rounds. I finished it with a ruffled edge. Getting the cuff the right size was a pain in the butt, and I figured there was an easier way to do it.

The result was simplicity itself.

First off, the yarn.

I went with James C. Brett Marble Chunky in Adobe. It took about 1 1/2 balls (200g) to complete the piece. It's a 100% acrylic, machine washable yarn with a wonderful feel. Absolutely gorgeous to work with. I choked a bit at the price of $15.99 per ball (what can I say... I'm a miser. ;-) ), but it was totally worth it!

Being a chunky yarn, I went with a size N/9.00 mm hook and started with a foundation chain of 60 inches. For the first row, I worked 10 sc for the cuff, then switched to dc until the last 10 stitches, where I switched back to sc.

The remaining rows were worked into the back loops only, sc into sc and dc into dc, until the cuff measured about 8 inches. It was more important to finish with an even number of rows than get an exact measurement. This is how it came out.





Like I said, simplicity itself.



The seam of the cuff was worked so that it would be hidden in a "valley" on the right side. I lined up the stitches and whip stitched the sc area, plus 3 dc stitches.

I had considered working a contrasting row of stitches around the edges, but as we looked at it, we all thought it was just fine the way it was. Here are some different views of it.













At this size, it would fit most adults, however it would be easy to customize for size, width and different yarns.

To customize the length, drape a tape measure over the shoulders where the wrap will rest and measure from wrist to wrist. Work the foundation chain to that length. Likewise, measure around the wrist to adjust the cuff size. Adjust the number of sc stitches to whatever width you'd like the cuff to be.

If you'd like it wider over the shoulder, use a smaller hook when working the cuff than the body.

Once the cuff is sewn closed, try working a contrasting colour around the edge in sc, working 2 sctog at the seams.

For a simple ruffle, start with a round of sc along the edge, starting near the cuff seam and working sctog at the seams. In the second round, work a few sc close to the seam (remembering to do 2 sctog at the seam), then a few hdc, making sure the number and type of stitches match on either side of the cuffs. Part way up the arm (wherever you'd like), switch to [dc, ch 1 dc] into each sc of the previous round.