Showing posts with label swatches. Show all posts
Showing posts with label swatches. Show all posts
Wednesday, May 9, 2012
Broomstick Lace Swatch in progress
Working on a swatch for my course while enjoying an evening with the Woolies. Not happy with it. I expect I'll be doing a couple more before I get one good enough to send for evaluation.
Labels:
broomstick lace,
course,
crochet,
samples,
swatches
Tuesday, January 17, 2012
Waffling
Labels:
charity crafts,
crochet,
swatches,
waffle stitch
Wednesday, October 5, 2011
Learning a new stitch
Going through the second part of my crochet instructors course, I came upon a stitch I've never heard of before. The knurl stitch.
Unfortunately, the instructions were less than informative. Based on the diagrams, I figured out that a foundation row of sc needed to be done first.
I'm not sure I did it right. Here's what I've worked so far.
Here's the front.
The knurl stitch is a two row pattern, with both rows working into the same base row without turning. The first row is worked in reverse into the front loops, then the second row is worked in the usual direction in the back loops.
After going over the written instructions and the diagram, I eventually figured out that the reverse row is similar to a reverse single crochet worked into the front loops. The second row is just regular single crochet in the back loops.
Here's a loop at just how deep the ridges are, giving you a look at both sides of the ridges.
Here's what the top looks like after having worked the reverse stitch in the front loops. Here's my problem. While the diagram and instructions make it clear how to work into the front loop for the first half of the stitch, it isn't at all clear as to who the second half of the stitch is worked. If I were doing a real reverse single crochet, this would look very different. I went online and found a video demonstrating the stitch, but there are significant differences from the instructions I have.
Will have to figure this out later.
Meanwhile, here's a look at the back.
I really like how it looks on this side, actually.
Here's a closer look at the working edge. You can see the line of back loops that the next row will be worked into.
Here, I've got a couple of sc worked into the back loops.
And here's what the edge looks like after both rows in the pattern are done.
Looking at the diagram in the background, you can see that front row of reverse stitch looks rather different, but the written instructions seem to be describing what I've done here, instead. I suspect I'm doing this wrong.
If I am, however, I still like the stitch. It looks really neat and makes a very dense fabric. It seems that this is actually a stitched worked as a stand alone row, rather than an all-over pattern, but I like it this way.
Now, off to peruse some video to see what it's supposed to look like instead.
Unfortunately, the instructions were less than informative. Based on the diagrams, I figured out that a foundation row of sc needed to be done first.
I'm not sure I did it right. Here's what I've worked so far.
Here's the front.
The knurl stitch is a two row pattern, with both rows working into the same base row without turning. The first row is worked in reverse into the front loops, then the second row is worked in the usual direction in the back loops.
After going over the written instructions and the diagram, I eventually figured out that the reverse row is similar to a reverse single crochet worked into the front loops. The second row is just regular single crochet in the back loops.
Here's a loop at just how deep the ridges are, giving you a look at both sides of the ridges.
Here's what the top looks like after having worked the reverse stitch in the front loops. Here's my problem. While the diagram and instructions make it clear how to work into the front loop for the first half of the stitch, it isn't at all clear as to who the second half of the stitch is worked. If I were doing a real reverse single crochet, this would look very different. I went online and found a video demonstrating the stitch, but there are significant differences from the instructions I have.
Will have to figure this out later.
Meanwhile, here's a look at the back.
I really like how it looks on this side, actually.
Here's a closer look at the working edge. You can see the line of back loops that the next row will be worked into.
Here, I've got a couple of sc worked into the back loops.
And here's what the edge looks like after both rows in the pattern are done.
Looking at the diagram in the background, you can see that front row of reverse stitch looks rather different, but the written instructions seem to be describing what I've done here, instead. I suspect I'm doing this wrong.
If I am, however, I still like the stitch. It looks really neat and makes a very dense fabric. It seems that this is actually a stitched worked as a stand alone row, rather than an all-over pattern, but I like it this way.
Now, off to peruse some video to see what it's supposed to look like instead.
Labels:
crochet,
knurl stitch,
swatches
Friday, September 2, 2011
Almost there.
I have officially completed all the swatches and samples for the first level of my Crochet Instructors course. I just need to finish the written portion, then I can send it out for evaluation.
Monday, August 22, 2011
What I've been doing
It's been a while since I've posted here, so I thought I'd do an update on what I've been doing.
Swatches.
Lots and lots of swatches.
These are for the crochet instructor's course I'm working on. There are several parts that I have to work with. A Teacher's Handbook (not pictured), the course binder and the lessons, which you can just see under the yellow and pink swatches on the left. I've been trying to stick to the same type of yarn and range of colours, unless something is specified, to keep it cohesive looking. That's just my own thing. Plus, since I'm doing this as a Michael's instructor, I am sticking to yarns I get from Michaels.
Throughout the course book, there are a number for Teacher Samples to make up. Those are the ones you see on the right. Following the patterns and instructions in the book, a lot of them are quite small; about 4 inches square, maybe.
Then I have to do the same stitches for my lessons. These require re-calculating the gauge to make 5 inch swatches (though with some diamond shapes, the 5 inches refers to the widest row). With 5 inch swatches, I am them supposed to give the gauge for 1 inch, in stitches and rows. I've been able to switch up hook sizes for most of them to get a nice round number in that 1 inch, but for some patterns, it's just not possible. That shell stitch, for example, starts with a chain in multiples of 6 + 1. Counting the turning chain, the pattern always works up to an odd number of stitches in each row. I can figure out how to make it a 5 inch swatch easily enough, the total number of stitches in each row will never work out to be divisible by 5. That means the gauge works out to include fractions of stitches, no matter what. :-P If I were writing a pattern and needed to give the gauge, I would never break it down to 1", but use whatever number of stitches works out into a round number. If I were to look at a pattern for something I wanted to make and saw a gauge of "3.6 dc = 1 inch" I wouldn't buy the thing.
This is just partway into lesson three for the first level. After taking this shot, however, I discovered a mistake I made with the shell stitch swatch you can see in pink. I'd accidentally read the wrong line and used worsted weight instead of sport weight. I caught it when working on the next sample, which was the one that is supposed to be done in worsted weight. I've reworked it since.
I don't really like doing swatches. They are very important for gauge if you're doing something fitted. They are great for practising stitch patterns. They are not a step to skip. I still don't like doing them. My problem with them has more to do with my frugality. *L* They seem like so much wasted yarn! When doing swatches for a project, I'll make up the swatch, without cutting and finishing off the yarn. Then I'll figure out any adjustments I may need to do to get the right gauge, then undo the swatch and use the yarn in my project. I look at my pile of watches and, while I'm quite pleased with how they look, I can't help but wince. I tell myself that they will remain useful as references later, so it's not really wasted yarn. Especially the teaching aids.
Eventually, I'll believe myself. ;-)
Swatches.
Lots and lots of swatches.
These are for the crochet instructor's course I'm working on. There are several parts that I have to work with. A Teacher's Handbook (not pictured), the course binder and the lessons, which you can just see under the yellow and pink swatches on the left. I've been trying to stick to the same type of yarn and range of colours, unless something is specified, to keep it cohesive looking. That's just my own thing. Plus, since I'm doing this as a Michael's instructor, I am sticking to yarns I get from Michaels.
Throughout the course book, there are a number for Teacher Samples to make up. Those are the ones you see on the right. Following the patterns and instructions in the book, a lot of them are quite small; about 4 inches square, maybe.
Then I have to do the same stitches for my lessons. These require re-calculating the gauge to make 5 inch swatches (though with some diamond shapes, the 5 inches refers to the widest row). With 5 inch swatches, I am them supposed to give the gauge for 1 inch, in stitches and rows. I've been able to switch up hook sizes for most of them to get a nice round number in that 1 inch, but for some patterns, it's just not possible. That shell stitch, for example, starts with a chain in multiples of 6 + 1. Counting the turning chain, the pattern always works up to an odd number of stitches in each row. I can figure out how to make it a 5 inch swatch easily enough, the total number of stitches in each row will never work out to be divisible by 5. That means the gauge works out to include fractions of stitches, no matter what. :-P If I were writing a pattern and needed to give the gauge, I would never break it down to 1", but use whatever number of stitches works out into a round number. If I were to look at a pattern for something I wanted to make and saw a gauge of "3.6 dc = 1 inch" I wouldn't buy the thing.
This is just partway into lesson three for the first level. After taking this shot, however, I discovered a mistake I made with the shell stitch swatch you can see in pink. I'd accidentally read the wrong line and used worsted weight instead of sport weight. I caught it when working on the next sample, which was the one that is supposed to be done in worsted weight. I've reworked it since.
I don't really like doing swatches. They are very important for gauge if you're doing something fitted. They are great for practising stitch patterns. They are not a step to skip. I still don't like doing them. My problem with them has more to do with my frugality. *L* They seem like so much wasted yarn! When doing swatches for a project, I'll make up the swatch, without cutting and finishing off the yarn. Then I'll figure out any adjustments I may need to do to get the right gauge, then undo the swatch and use the yarn in my project. I look at my pile of watches and, while I'm quite pleased with how they look, I can't help but wince. I tell myself that they will remain useful as references later, so it's not really wasted yarn. Especially the teaching aids.
Eventually, I'll believe myself. ;-)
Subscribe to:
Posts (Atom)


