Christmas goose - the verdict!

Well, I can at least say the goose was a success!  It wasn't at all fatty like I remember.  Actually, I found it tasted like turkey drumsticks.



Unfortunately, by the time we got to the entree, even with the long breaks in between courses, we were all so full, no one could eat much!  Of the five of us, two liked the goose quite a lot (including me), two could take it or leave it, while one didn't like it at all.  Which isn't too bad, considering we all have very different tastes!

As for the rest:

Smoked mozzarella mashed potatoes
(quantities to taste)

yellow potatoes, cooked and mashed with:
smoked mozzarella, shredded
sour cream
garlic granules
crumbled bacon
salt and pepper

Broccoli done the Julia Child way.

Place florets and peeled stems in a pot with about half an inch of water.  Cook with lid on until almost tender.  Drain.  Return to pot with butter, minced garlic, salt and pepper to taste.  Cook in butter until crisply tender.

Soooo good!

Now we need to wait around for dessert. :-D

Christmas Eve - our goose is cooked!

Part One
Part Two

These should be the last photos of the goose preprations.

The goose itself, cooked to an internal temperature of 82F, finished roasting a fair bit faster than the time recommended by weight.  Here's how it turned out.



It's looking quite crispy, which is what I like.  Here, it's been moved to the platter so I could drain the roasting pan.  As I write this, it's back in the roaster and staying warm in the oven.






I drained the roaster into a 1 quart canning jar, including some of the drippings, but it was too much.  Aside from this amount, I got a soup bowl's worth of drippings that still had a small amount of fat on top.

I'm hanging on to the fat, as it's supposed to be really good to cook with.

As for the drippings, I used them to make a gravy.  There was not much more than a cup of drippings, two which I added a splash of red wine and another of orange juice and brought to a boil.  I thickened it with corn start.  No other seasonings were added.  It's a rather tangy gravy that I kinda like.

Meanwhile, on the assembly line, we've got Bacon and Cheddar devilled eggs, mashed yellow potatoes with smoked mozarella, garlic and bacon bits, and broccoli a la Julia Child.

I'm getting soooo hungry!

Christmas Eve - cooking our goose

Part one

The goose is now in the oven, so I've got a bit of a break before I have to start the next longest cooking items.



The first order of business was to remove the goose from the marinade.  There wasn't a whole heck of a lot to take it out of.  I decided to leave some of the marinade herbs on the goose, putting more into the cavity.  Then there was the job of piercing the skin with a fork all over.  Some areas were very hard to pierce.  I hope I was thorough enough.  I didn't truss it, though I did cut slits on either side of the tail bone and tucked the ends of the drumsticks in.






I was thrilled to find a turkey lifter a couple of days ago.  It's got little legs to keep the bird lifted.  For the cooking/basting liquid, I combine roughly 1 cup each of red wine, orange juice and boiling water.  Mdm Benoit seemed adamant about not using anything cold on a goose in all her recipes, so I thought adding the boiling water might be a good idea.

The goose is seasoned with our favourite spice mix.  As for the wine, I picked this one for cooking with because it was cheap.  I'm trying a glass to drink right now, and I can't say I'd recommend it for drinking.  You know how, when tasting red wine, you're supposed to swirl it in the glass to check the viscosity?  It doesn't seem to have any.  Why that makes a difference, I don't know.  Either way, it's a pretty mediocre wine.  Not bad, but not good, either.  I'm not a wine drinker, though, so take it for what it's worth. *L*

For the meal itself, I picked a Big Ass Zin.  We've tried Big Ass Cab before and enjoyed it.  I considered getting it again, but wanted to try something different.  I have to admit, I bought the brand for the label art!  Like I said, I'm not a wine drinker, and I don't know brands.  So I usually end up picking them based on descriptions and, lately, humour (we picked up some Vampire wine recently, too).  Not the best way to pick a wine, I must admit!  When I saw the Big Ass Cab label, I was smitten by the joie de vivre.  I couldn't help but think that a company that had such a lively sense of humour just had to have good taste, too!  Thankfully, the wine lived up my hopes.  I would definitely recommend it.  Hopefully, we'll be just as happy with the Zin as well.

Merry Christmas!

We begin our celebrations tonight, but I'll still try to post photos as I'm able.  Just in case I don't get a chance, though, I will take this opportunity to wish you all a joyous and peaceful Christmas, and a happy new year!



Here is our totally unfashionable, wild and eclectic Christmas tree, covered almost entirely with many years of hand made decorations.  There were a few that aren't on there, as we ran out of spce. 

Maybe next year, we'll have a second tree for the girls. :-D

Getting ready - preparing the Christmas goose

While we were still living in Manitoba, we shared our celebrations among three households, Reveillon with my husband's parents, Christmas day with my parents, and finally a party at my BIL's on Boxing Day.  Now that we live with no other family nearby, we've started to celebrate Wigilia on Christmas Eve.  Sort of.  There's pretty much nothing about the food that's traditionally Polish anymore!  Instead, we explore with different dishes and new foods.

This year, I'm doing a goose.

I've never cooked goose before.  In fact, I had been thoroughly turned off of goose the one time my mother served us a domestic goose.  Our previous experience had been with a Canada Goose my father had shot one year that was delicious, so we had high expectations.  I was pretty young, so I don't remember the taste all that much, but I do still remember being incredibly disgusted by the fattiness.  I don't think any of use were really able to eat it.  My mother never served goose again.

Over the years, I've encountered many references to goose and even goose grease, which had many uses, including medicinal.  Goose was clearly greatly enjoyed by many, with glowing descriptions of the flavour, and I could never understand why!

Fairly recently, while watching some Julia Child dvds, I discovered that goose skin was supposed to be pierced before cooking to allow the fat to drain out.  I now suspect that this was a step that got missed - we certainly never had to do it for any other birds we cooked!  Armed with this information, we decided to give it a try this year.

In going through my recipe books, I find myself turning once again to Mdm Benoit.  We'll be skipping the stuffing, but will roast the goose according to her basic method, then using a red wine/orange juice baste from modified from another recipe while it's baking.  The basic roasting instructions includes a 24 hour marinade, which I'm late for by a few hours.  The marinade is made up of:

Juice of 2 lemons
1/2 cup oil
1 carrot, coarsely grated
1 onion, thickly sliced (my fresh onion is for something else, so I used dry)
1 clove garlic, halved
6 whole cloves
1/2 tsp thyme
1/2 tsp basil
1 handful parsley

The first step is to "Wipe the goose with a cloth dipped in vinegar.  Do not scald, nor soak in cold water, nor wash with soap."

Soap??

The recipe doesn't make for a lot of marinade.  The only container I've got that's big enough to hold the goose to marinade is my roaster.



That one clove of garlic looks so lonely and ineffectual!  What you can't see is the huge neck tucked under the bird.  I had expected the neck to be removed, like with a turkey.  It didn't come with the liver or heart or anything, either.  Oh, well.

I covered it with plastic wrap, since it won't fit in my fridge with the lid on.  I'll have to make a point of remembering to turn it after a few hours or something, since what little liquid there is is lining the bottom of the roaster.

Other recipes I looked at included things like "remove excess fat from inside the cavity," but I didn't find any.  I guess the company that preps these birds is rather thorough about such things.

I really, really hope this works out.  I may have been young that one time I had domestic goose, but the memory of that fattiness still gives me the willies. If, however, it doesn't work... well, we have lots of tourtierre!

Christmas tourtierre, day two, part two

Day one - making the filling.
Day two, part one - making the dough.

Now for day two, part two - assembling and baking the tourtierre!

Just a warning, this post is going to be image heavy. :-D




After the dough has had a chance to chill, we set up our assembly line.  For what is usually my part, I've got the filling (stirred up to make it easier to scoop) with a larger spoon, a smaller spoon to smooth out the filling in the crust, a bowl of water to moisten the edges of the bottom crust for the top crust, a paring knife to cut the excess dough off and cut in steam vents.  The lumps of dough tend to be a bit hard to work with, so when I have a moment, I grab some and knead it to make it more pliable.  We've also got the pie plates ready and waiting.  My younger daughter had the job shuttling things between me and my husband.




My husband takes the job of rolling out the dough - at least as long as he can.  This job is quite hard on the back. :-(

We roll the dough between two layers of heavy vinyl.  It makes the job much easier.  Clean up is easier, too.




The very first completed pie.  Isn't it pretty? :-D

Our oven can bake 3 pies at a time, so we work in groups of three.  We'd do the bottoms and filling for three pies, then to the tops.  By then, the oven is preheated and my older daughter starts on the baking.

The baking changes with every move, depending on what oven we've got at the time.  The recipe says to bake at 500F until golden brown, but we've never gone that hot.  Our current oven has a cool spot in the back left.  There's a couple of things we do to compensate for it.  One is to bake with a pan of water in the lower rack.  The steam helps even out the heat.  If we've got more than one item in at once (like when I'm doing 2 loaves of bread), we switch them around half way through baking.




Here are the first two batches (minus a pie that was sacrificed to the greater good...).  The batches are cooled in phases.  When they first come out of the oven, they rest on the stove for a bit.  Then they get moved to a towel lined ironing board I set up near the back door.   By the time the surface is completely covered, the first batch is cool enough to head outside.






These prairie winters come in handy!  The pies are placed between layers of towels for protection and left until frozen.  Once completely frozen, we wrap them in heavy duty foil.  We don't have a large enough freezer for them all, so they usually end up in a box or bin and go back outside.




Here are the first couple of pies using the paprika enhanced dough.  We haven't tried one yet.  We did notice a significant difference in the dough, though.  The first few batches were the herb dough with pastry flour.  Those were much easier to roll out and handle.  The all purpose flour batches are much denser.  However the paprika dough, even though it was with all purpose flour, was a lot smoother and more pliable.  Not quite the same as the pastry dough batches, but similar.





After baking, the paprika dough loses some of its brilliant orange colouring.

When we start getting to the end of the filling, things start to get a bit more creative.





The remaining filling wasn't enough to fill a regular sized pie, so I made a couple of tart sized pies.  I was just mucking about and came up with these two.  I did one more, but it's just a meat filled rectangle.




I think they turned out rather well.  We didn't bother freezing these.  They'll make handy little snacks or lunches for my husband to take to work, I think. :-D

Once all the filling is gone, there's usually some left over dough.  In fact, we look forward to there being extra dough!  Here's what I made with half of it.



I kneaded some shredded aged cheddar cheese into the dough, then rolled it out.  I wanted to get a nice, neat rectangle out of it.  In the end, I ended up folding the edges towards the middle on two sides, then folded it in half, to get a long sort of loaf shape.  I cut that to get these little biscuity things.  I considered buttering the dough before folding, which would have been delicious, but it was past midnight and I just wasn't up to finding out where the butter dish ended up. *L*



Meanwhile, my older daughter used the other half of the dough, without added cheese, to make a whole bunch of little shapes that would bake a lot faster.

Leftover dough makes for great snacks like this.

That's it!  Our 2010 Christmas tourtierre are all done.  Final count: 23 pies (6 in paprika dough), 3 mini pies and a whole bunch of biscuit thingies.

I refuse to overwhelm ourselves with baking over the holidays and am more than willing to "cheat" by buying baked goods, but this is one family tradition I look forward to every year and passing on to our children.

Christmas tourtierre, day two

The first half of our dough making is now done.  I figured I'd post a couple of shots before we start our assembly line.



We make our tourtierre with a hot water dough (another Mdm Benoit recipe) rather than the flakier cold water dough I usually use.  Here's the basic recipe our version is a variation of.

Mdm Benoit Hot Water Pie Crust
(enough for 1 double crusted pie)

1/4 cup water
1/2 cup shortening
1 1/2 cups pastry flour
1/2 tsp salt
1/2 tsp baking powder.

Bring water to a boil.  Add shortening.  Remove from heat and stir until smooth.

Sift, measure and re-sift flour with salt and baking powder.  Combine mixtures.  Stir until smooth.

Set in covered container and chill for 2-3 hours.

We do ours in triple batches.  Usually I just use all purpose flour, but this year I tried pastry flour for about half the batches.  Usually we use Crisco shortening, but since they went transfat free, the resulting dough has a very different texture, so I'm trying a new brand.  As you can see by the photo, we also add egg and some herbs to the mix.  With so many batches to make, there's no way we'd do it all by hand!  I get one of my daughters to measure and sift the batches of dry ingredients while I use a kettle to boil the water and a food processor to whip up the liquid ingredients.  Then I transfer it to my KitchenAide mixer (best kitchen appliance I never paid for! *L*) with a beater attachment.  After beating in several cups of flour, I transfer to a dough hook and finish it off.  Then the dough it divided into three balls and set aside for chilling while the next triple batch is made.



Once all the batches were done, they joined the meat on the balcony to chill.  The bright orange dough is a new experiment this year; instead of herbs, the last two triple batches have paprika in them.  Should be interesting!

While the dough chilled, we headed out to do our annual Christmas family photo.  The meat is now inside to get closer to room temperature.  It won't take long, as it didn't freeze overnight; not even at the edges.  I'll have photos of the assembly later on.  Whether or not I get them up by tonight is a different thing. ;-)

Baking time! Tourtierre, step by step

It's that time of year again!  The weekend we dedicate to making our Christmas tourtierre.  This year, I ordered a total of 24 pounds of ground meats which should get us about 20 pies, the way we fill them. ;-)



I give the butcher shop a week to fill our meats order.  The last of it was ground shortly before I picked it up, but the rest was frozen as they slowly filled my order.  They don't normally carry some of what I ask for.

Though our own recipe is a family variation, this is the basic recipe we use.  The quantities are for one pie, but the ingredients in the photo are x24, except that only about half of the meat is in the photo.  Also, our mix includes some spices different from the recipe.

Mdm Benoit's Quebec Tourtierre

1 pound minced pork
1 small onion, chopped
1 small clove garlic, minced
1/2 tsp salt
1/2 tsp savory
1/4 tsp celery pepper (I use just celery seed)
1/4 tsp ground cloves
1/2 cup water
1/4 - 1/2 cup bread crumbs



All the meats are dumped into our giant stock pot.



Then everything but the bread crumbs are added and stirred in.  For one pie, you would bring it to a boil over medium heat and cook for 20 minutes, stirring frequently to break up lumps of meat.  It takes a fair bit longer with this much meat!  (Note: while most of the ingredients are increased by the same amount, I use far less water; perhaps a quarter the amount it would be if I used the same math as for the rest.)

Once the meat is cooked, take it off the heat and stir in part of the breadcrumbs.  Let it sit for 10 minutes, then check to see if the liquid is absorbed.  If not, do it again every 10 minutes until the liquid is absorbed.



It should look like this.



evening update: corrected photo

At this point, the filling is allowed to cool, then baked in a double crust pie.  For this much, we let the filling cool for a few hours, then stick it outside overnight.  It doesn't freeze completely in that time, which works rather well when it comes time to fill the pies.

When we didn't have someplace safe outdoors to put the pot, the trunk of a car works rather well.  Of course, if you live somewhere that doesn't get very cold at night, you'll have to find space in a fridge or freezer!

Tomorrow, we make the dough and assemble the pies.  Hopefully, we won't run very late and I'll be able to post photos at the end of the day.  If not, I'll have them up on Monday.

Oh, man, the house smells good!

2010 Christmas decorations - fifth (and last!) batch

We've got some different ones in here. :-)



Top left: made by me

Beads: clear transparent beads with silver centres topped with clear transparent seed beads with silver centres

Wrap: alternating blue Bernat Alpaca yarn with silver metallic crochet thread

Centre: blue "gem" card stock, self adhesive gem, silver glitter glue


Top centre: made by my younger daughter

Beads: transparent gold beads with silver centres topped with clear seed beads with silver centres

Wrap: first, Bernat Shimmer metallic yarn, then red metallic crochet thread, then gold metallic crochet thread

Centre: blue "gem" card stock and a self adhesive gem


Top right: made by my younger daughter

Beads: transparent green seed beads with silver centres

Wrap: red and black eyelash yarn and white novelty yarn together

Centre: green "gem" card stock with a self adhesive gem



The three bottom stars have reversed the wrapping pattern.  Instead of starting at the points and working towards the middle, the first wraps start inside the V's and work outwards.  They are still wrapped the same way.  Oh, I just realized I should have taken photos of the backs, which look so nice (except for the loose bits of yarn ends from changing colours) that I seriously considered cutting out more stars and making them backwards!

On the plus side, I like that the strands on the inside are flush to the surface; something I found a bit annoying while wrapping in the original way.  Starting from the centre made it a lot easier to work with very thin strands, too. On the down side, the very last wraps, at the points, are more of a challenge to place without them sliding off and I highly recommend dabbing glue onto the points to prevent loosing them entirely.

Bottom left: made by me.

Beads: silver metallic rounds topped with clear seed beads with silver centres.  After the wrapping was done, each pin had a dab of gold glitter glue added.

Wrap:  starting at the centre, silver metallic crochet thread, red metallic crochet thread, gold metallic crochet thread, red metallic crochet thread

Centre: red "gem" card stock, self adhesive gems


Bottom centre: made by me

Beads: semi transparent green beads with silver centres topped with clear seed beads with silver centres.  When finished, a dab of silver glitter glue was added to each point.

Wrap: starting from the centre, green acrylic yarn with a silver metallic strand, silver crochet thread, then back to the green

Centre: gold "gem" card stock, red self adhesive gems, a self adhesive silver bead in the centre, plus silver craft gems affixed with silver glitter glue


Bottom right: made by my younger daughter

Beads: none  Dabs of clear drying white glue were added to the points when the piece was complete

Wrap: blue Bernat Alpaca and red metallic crochet thread

Centre:  green "gem" card stock.  My daughter accidentally cut the piece too small and it turned out to be a bit off centre, showing the white foam core in one section.  Using a combination of self adhesive gems and gems affixed with glitter glue, she was able to cover the mistake and turn it into a design element. 


That's the last of them!  These were really fun and satisfying to make.  I would happily make dozens more!

Now to decide: which to keep and which to give as gifts!

2010 Christmas decorations - fourth batch

These were made by both my daughters



Top left: made by my older daughter

Beads: amethyst

Wrap: variegated ribbon, gold metallic crochet thread

Centre: black card stock; centre is a craft gem affixed with gold glitter glue, the others are self adhesive gems



Top centre: made by my younger daughter

Beads: pearls

Wrap: novelty yarn and gold metallic crochet thread used together

Centre: red "gem" card stock, blue self adhesive gems, gold gem affixed with gold glitter glue


Top right: made by my younger daughter

Beads: transparent gold beads with silver centres, topped with clear seed beads with silver centres

Wrap: alternating Patons Brilliant metallic yarn with Bernat Glow in the Dark yarn

Centre: scrapbooking paper and a self adhesive gem


Bottom left: made by my older daughter

Beads: none

Wrap:  brown and cream crochet thread - wrapping with such thin thread was a major challenge!

Centre: black card stock with two different patterns of scrapbooking paper coated with clear drying white glue


Bottom centre: made by my older daughter

Beads: silver metallic

Wrap: decorative ribbon, textured novelty yarn

Centre: scrapbooking paper, self adhesive gem, silver glitter glue "icicles"


Bottom right: made by my older daughter

Beads: transparent red seed beads with silver metallic centres

Wrap: plain white acrylic yarn, then red metallic crochet thread

Centre: plain foam core with a self adhesive gem

2010 Christmas decorations - third batch

This next batch were all made by my older daughter.



Top left:

Beads: alternating red and green seed beads

Wrap: Red is Bernat Shimmer and red metallic crochet thread together, green is a textured yarn from my daughter's craft stash

Centre: black card stock with a mix of self adhesive gems and craft gems affixed with gold craft glue


Top centre:

Beads: silver metallic rounds

Wrap: silver metallic crochet thread alternating with pale blue yarn of unknown origin

Centre: scrapbooking paper, self adhesive scrapbooking gems and dots of silver glitter glue


Top right:

Beads: amethyst beads

Wrap: variegated and textured metallic yarn

Centre: scrapbooking paper with self adhesive gems


Bottom left:

Beads: faux pearls

Wrap: variegated yarn from my daughter's craft stash together with gold metallic crochet thread

Centre: scrapbooking paper with self adhesive gems


Bottom centre:

Beads: silver metallic rounds

Wrap: variegated novelty yarn of unknown origin

Centre: plain foam core with self adhesive gems


Bottom right:

Beads: gold transparent beads with silver centres

Wrap: variagated and textured craft yarn followed by plain brown crochet thread and gold metallic crochet thread together.

2010 Christmas decorations - second batch

Top left:

Beads: clear beads with silver centres topped with clear seed beads, also with silver centres

Wrap: Bernat Glow in the Dark yarn in white, silver metallic crochet thread, then back to the glow yarn

Centre: A floral image cut from some scrapbooking paper in shades of purple, topped with silver glitter glue.  It's still wet as this photo was taken, which is why the flower is not all that visible.


Top centre:

Beads: clear gold beads with silver metallic centres topped with green seed beads with silver metallic centres

Wrap: Textured green yarn from my older daughter's craft stash, gold metallic crochet thread, then both twisted together.

Centre: green "gem" card stock paper and a gold sequin affixed with gold glitter glue


Top right:

Beads: amethyst coloured semi-transparent beads topped with clear seeds beads with silver centres

Wrap: Bernat Glow in the Dark yarn and gold metallic crochet thread twisted together

Centre: Large flower from some scrapbooking paper with the stamens "painted" with gold glitter glue


Bottom left:

Beads: faux pearls topped with the same seed beads as above

Wrap: animal print ribbon yarn a friend gave to me a few years back

Centre: blue "gem" card stock, gold craft gem affixed with gold glitter glue, silver craft gems affixed with silver glitter glue


Bottom centre:

Beads: red faux coral beads

Wrap: novelty yarn of unknown origin

Centre: red "gem" card stock, self adhesive scrapbooking gem


Bottom right:

Beads: silver metallic round beads

Wrap: novelty yarn of unknown origin

Centre: foil base with gold self adhesive scrapbooking gem

2010 Christmas decorations - first batch

The last of this year's Christmas decorations are now done!  I did the last one today while showing my daughter's friend how to make them, and he'll be doing a total of three as gifts, so I won't be taking photos of those.

Our total this year is 30 decorations, which I think is a record.  We may have done more with our cinnamon dough decorations, but a number of them were quite tiny, whereas these are all the same size.  I took photos of them in groups of six and will be doing a post with details of each group - just to warn you that there's going to be 5 more posts after this one! LOL

Here's the first batch.



There of these were already photographed in the step-by-step post on how these were made. Starting on the top left, I've got:

Beads: green semi-opaque beads with silver centres.  The holes were too large, and the pin heads (I used shorter pins) would go right through some of them, so I added seed beads onto the pin first.  In this case, clear beads with silver centres.

Wrap: Leftover Christmas yarn from last year; acrylic with a strand of silver metallic.

Centre: green "gem" card stock and a single craft gem affixed with gold glitter glue.



Top middle:

Beads: silver faux metal round beads.  I happened to use longer pins for this one, which had a wider head, so I didn't need to use seed beads to prevent them from sliding through.

Wrap: same type of yarn as the red one previously described.

Centre: foil base with teardrop shaped self-adhesive scrabooking gems with the points turned inward, topped with a craft gem affixed with "opal" glitter glue.

Top right:

Beads: semi-transparent amethyst coloured seed beads

Wrap: Patons Brilliant yarn in Plum

Centre: foil base with craft gems affixed with "opal" glitter glue.



Bottom left:

Beads: Semi-transparent red beads with silver centres, topped with clear seed beads with silver centres

Wrap: Started with Bernat Shimmer metallic yarn, then gold metallic crochet thread (Sunset by Phildar, if I remember correctly), ending with red metallic crochet thread

Centre: red "gem" card stock with a gold craft gem affixed with gold glitter glue


Bottom centre:

Beads: same silver beads as the green one above

Wrap: Bernat Shimmer and red metallic crochet thread together

Centre: foil base with self adhesive gems


Bottom right:

Beads: the same silver beads as above, however I was using short pins by this type, so I had to top them with seed beads (clear, silver centres) so they wouldn't pull through the holes. 

Wrap: unknown novelty yarn; I can't even remember if it's left over from something I bought myself, or if I got it through an exchange, the Reuse Centre or Goodwill! *L*

Centre: dark blue "gem" card stock with silver craft gem affixed with silver glitter glue.

2010 Christmas ornaments - Step-by-step

Every year, I try to make a new set of decorations for our Christmas tree, and to give away as gifts.  The goal is to shoot for some new craft or technique each time.  Last year, it was apple-cinnamon dough shapes.  They're hanging on our tree now, and still smell just as lovely, as do the sachets I made the year before. 

This year, I'm starting far later, but thankfully the project I chose this time is very quick to make up.  A crafter friend had shared the instructions, and this is my variation of the design.

First, go visit the site and check out the excellent step-by-step instructions that are already there.  I did things differently, but the wrapping instructions are unchanged.

Now, on to the materials.



For my version, I decided not to use squares of cardboard glued together.  Instead, I found some foam core to use.  It's not something I normally buy, as I find the cost per sheet ridiculous, but I happened to catch a sale at Michaels and bought two sheets.  I've been using one of them as a backdrop for a lot of my craft photos now.  Very handy.

For the template, I cut two 3 inch squares out of some light cardboard I happened to have - they were from packages of 4x5 printer photo paper.  I also went through my yarn stash and dug up some Christmas yarns I used to make hats last year, with a silver metallic thread twisted in, some Patons Brilliant left over from the Ballet Neck Sweater I made for my mother, and some shimmery yarns I picked up here and there but never settled on a use for them, as well as whatever odd bits of yarn I thought might be interesting.  We ended up using yarns not pictured, but I'll get shots of all of them later.

Also on the materials list is scissors, an Xacto knife, sticker gems for scrapbooking, craft gems, white glue, glitter glue, beads and whatever else I found in my craft cupboard I thought might be useful.



To make the template, I marked a 1 inch grid on a square to have some guidelines, then taped the two together to make an eight pionted star.



Then I began tracing the shape onto the foam core.  I placed them very close together, sometimes right up against each other because... well, I guess I just like making things difficult for myself. ;-)  I hate waste, and it seemed to me having too much space in between the stars would leave me throwing out far more pieces of foam core than I wanted.  If you're not particularly confident with using an Xacto knife - or just want to make life easier - I'd recommend spacing them out more.




Then I borrowed my daughter's shorter metal ruler (mine's an 18 inch size; way too big for this job) and started cutting out the shapes.  Using my right hand.

I'm a lefty.

One thing about crafting is that I'm learning to use both my hands a lot more!  The sheet of foam core took up too much space to be able to twist it around as I cut, so I had to use both arms. As I worked farther up the side and the angles got harder to reach, I ended up roughly cutting out the shapes so that I could do the fine cutting without the rest of the sheet in the way.



The first star shape.  Unfortunately, my blade was a bit dull, so the edges aren't as neat as I'd like, but with this pattern, as long as they're straight, it's okay.

I did end up having to go out and buy more blades, though, as I couldn't find my package of spares.  Ah, well.



I refer you again to the detailed instructions leading up to this stage. 

For my first star, I decided to go with a sparkling yarn that was much thinner than the instructions recommended.  The end is glued in place under some regular kitchen foil (making sure to wipe off the glue that got onto the front, once I finished getting this shot), and I chose some silver beads to add to the pins on the points.  The beads are optional, but I prefer with over without.



Following the wrapping instructions, this is the first round from the front.



Here's the back view.

I kept wrapping, but after a while it became clear that my yarn choice was really too thin.  Too much white was showing in between the strands.  Unfortunately, I didn't think to get a photo to show the problem until after I'd undone it, so you'll have to take my word for it.  It kinda sucked.



I decided to simply add another yarn and just taped the end beside the first.  This yarn is some Bernat Shimmer left over from a skirt I crocheted from my daughter.  (Once I've added an elastic to the waste, I'll be doing a post on the skirt, too.)



The combination of yarns worked out much better.  As I went around, I loosely twisted the two strands around each other to keep them from separating while I worked.  Here's the front after two complete wraps.  By the time I started the second wrap, I pushed the pins and their beads snug against the points, rather than wait until the end.  I found they tended to get in the way as I wrapped.



This is after about half a dozen wraps.  You can see how nicely the points are starting to form up, which wasn't happening when using just the thin yarn alone.  I was able to wrap these quite tightly, as the yarn had very little stretch to it.  The emerging pattern reminded me of temari quite a bit.




I kept on wrapping until the points were completely covered.  This is the very last wrap on the front.



The back builds up fairly thick in the very centre.  This actually made it a lot easier to finish the yarn end.



Using a tapestry needle, I sewed the end into the centre of the back, crossing the stitches a few times...



So that it would look nice and neat, like this.

The hanger was stitched into the back last for this one, but with the ones I planned to use glue on, I added the loop at this point. 



The front, ready and waiting for some final touches.



For this one, I used just some adhesive scrapbooking gems.  At this point, the ornament is complete, except for the hanger.



Here are the first three completed ornaments.  For the green and purple, I used some glitter glue, which is still wet in this photo, to place the gems.

After these were done I headed out to get my new blades so I could cut out more shapes without tearing the edges too badly.  Since then, one of my daughters and I made six more, most using novelty yarns, and using decorative papers in the centres as well as foil.  Once the shapes are cut, these are remarkably quick to make.  It's almost addictive!  When we're done, I post more photos.  I'm very pleased with the results.